Solutions
Anti-corrosion & rust prevention
Complete VCI, desiccant and moisture-control systems for long-term asset protection.
What this covers
Corrosion is not one problem with one answer. A machined part in a dry store, a coil in a yard and a gearbox in a container each fail differently, and the packaging that suits one wastes money on another. This is the consultative end of what we do: work out which mechanism is actually at play, then specify against it.
How it runs
- 01
Identify the metal
Ferrous, non-ferrous or mixed. Mixed-metal assemblies need an inhibitor formulated for both, which narrows the options quickly.
- 02
Establish the exposure
Indoors, outdoors, coastal, containerised. Duration matters as much as severity. Twelve months indoors can be worse than four weeks at sea.
- 03
Pick the mechanism
A vapour inhibitor for enclosed spaces, a barrier where moisture must be excluded, a desiccant where it is already inside, an oil where the surface must be coated. Often more than one.
- 04
Check it holds
The package has to survive handling and storage as designed. A protection system that gets opened for inspection and resealed badly is no system at all.
Where a requirement names a standard or specification, send it with the enquiry. We will confirm in writing what we can and cannot meet before you order, rather than after.
What you get
- A specified system rather than a product recommendation
- Nitrite-free, biodegradable VCI throughout the range
- Datasheets and SDS available on request
- One point of contact for film, paper, desiccant and liquids